What is the use of magnesium powder introduced by magnesia manufacturers

Do you know the advantages of light burning magnesium powder by magnesia manufacturers? Lightly burned magnesium powder does not burn at all. It can work continuously for a long time at 250 degrees Celsius, and can work normally for 30 minutes at 1000 degrees Celsius, without causing ignition at the same time. Even under the premise of flame heating, as long as the flame temperature is not higher than the melting point of Cu, the cable can be used continuously without replacement after flame suppression. The flame does not produce toxic fumes and gases when it is baked.

The cable can be used continuously without replacement after flame suppression. The flame does not produce toxic fumes  and gases when it is baked.

Strong overload maintenance ability

When the line is overloaded, only heating can not reach the melting point of Cu, and the cable will not be damaged. Even if the breakdown occurred instantaneously, there was no carbide present in the crystal at the breakdown. After no overload, the cable function remains unchanged and continues to work normally.

High operating temperature

Magnesia manufacturers introduced that because the melting point of the insulation layer crystal is much higher than Cu, the cable used normally for a long time may reach 250 degrees Celsius, and it can continue to work normally near the melting point of copper at 1083 degrees Celsius in a short time.

Good anti-corrosion and explosion-proof performance

Because of the use of seamless copper tubes as protection, lightly burned magnesia powder has waterproof, moisture-proof, oil-proof and certain chemical damage effects. Copper pipe has good mechanical strength and good explosion-proof performance.

Long working life

Magnesium oxide cables are made of inorganic materials, no insulation aging, and the working life can be more than three times that of ordinary cables.

More flexible laying

Magnesia manufacturers say that magnesium oxide cables can be laid on the bridge together with general cables. It is more flexible than ordinary cables. The investment of cable bridge is saved and the overall cost of the project is reduced.